1.產品帶ECU(分配閥與控制一體),遙控器,泄氣閥,充氣泵,充氣閥,氣管,管接頭,線束,切管器等配件。
2。產品采用壓力控制的方式對皮囊充氣或泄氣,從而實現車身的升高或下降,產品帶手機APP(安卓與APPLE系統)與遙控器兩種方式來控制系統, 可以通過APP或者遙控器來設置系統所需壓力,并自動控制氣泵充氣來增壓,通過ECU內的電磁閥組泄氣來降壓。
3。產品有設置三段記憶功能,只能控制一個通道的同升或同降。
4。產品結構緊湊,穩定,安裝簡單,操作方便
13886501872
13809667059
Function Description:
1. This system controls the height of the air spring by means of pressurization and decompression.
2. This system can control two air circuits independently. If the front bridge of the car is connected to one air circuit and the rear bridge is connected to the other air circuit, the left and right wheels of the front axle of the car can be lifted or lowered at the same time, and the left and right wheels of the rear axle of the car can be raised or lowered at the same time. Same ascent or same descent; if the left wheel of the rear axle of the car is connected to one air path and the right wheel is connected to the other air path, the left wheel and the right wheel can be controlled independently, the left wheel is single-lifted and single-lowered, and the right wheel is single-lifted and single-lowered.
3. The system has a three-stage memory setting function, which can set three fixed heights according to the user's personal preference. If you press the 1st gear, the system will automatically start, so that the air spring can be adjusted to the 1st gear set height.
4. The system can switch freely between manual function and memory function.
5. The system comes with a wired LCD remote control, which can facilitate the operating system.
6. This system is connected with the ignition wire of the car. When the car is started, the system will automatically return to the height of the air spring before the last ignition.
7. The mobile APP function will be created in the later stage of the system, and the mobile APP will be used to control the settings of the entire system. The mobile APP is equivalent to the remote control function.